What can a Class B contractor do in California?

This site is an independent referral service for Concord, CA, not a contractor. A Class B license and the newer Class B-2 license cover different slices of a remodel, and the rules are stricter than most homeowners expect. This is not legal advice.

Published November 16, 2026. Reviewed against public sources listed below.

A kitchen or bathroom remodel usually needs two trades

Business and Professions Code section 7057, read on November 16, 2026, says a general building contractor, the Class B license, is a contractor whose principal business requires "at least two unrelated building trades or crafts" to build, support, shelter, or enclose a structure, or to superintend that work. Most kitchen and bathroom remodels clear that bar on their own: plumbing fixtures, electrical circuits, cabinetry, and tile are different trades. A contractor licensed in only one trade, tile alone for example, is a specialty contractor in that trade, not a Class B.

Framing or carpentry alone skips the two trade test

Section 7057(b) lets a general building contractor take a prime contract or a subcontract for a framing or carpentry project by itself, with no second trade required. But the same subsection says a Class B "shall not take a prime contract for any project involving trades other than framing or carpentry unless the prime contract requires at least two unrelated building trades or crafts other than framing or carpentry," unless the contractor holds the matching specialty license or subcontracts that trade to someone who does. The subcontract rule works the same way. Framing or carpentry does not count toward that two trade minimum either: the statute says the contractor "shall not count framing or carpentry in calculating the two unrelated trades." So a Class B framing a wall opening for a new kitchen layout can take that job alone. The same contractor taking the whole remodel as the prime contractor still needs two other trades in the job, or a licensed subcontractor for whichever trade is missing.

The newer B-2 license covers a lot of remodeling, with limits

Section 7057.5, in force since January 1, 2021, created the "B-2 Residential Remodeling Contractor" classification for a project on an existing residential wood-frame structure that needs at least three unrelated trades in a single contract. A B-2 may take a prime contract covering drywall, finish carpentry, flooring, insulation, painting, plastering, roof repair, siding, tiling, and installing, repairing, or replacing electrical, plumbing, or mechanical fixtures, such as outlets, faucets, or exhaust fans. That list covers much of a kitchen or bathroom refresh. The section requires at least three of those trades in the contract, not two, and the B-2 may self-perform the work or subcontract any of it to an appropriately licensed subcontractor.

What a B-2, and a Class B without a specialist, cannot sign for

Section 7057.5(c) bars a B-2 from contracting for C-16 fire protection, C-22 asbestos abatement, or C-57 well drilling work unless it holds that license or subcontracts to someone who does, from making structural changes to load-bearing footings, foundations, walls, or roof structures, and from installing, replacing, substantially altering, or extending an electrical, mechanical, or plumbing system, as opposed to swapping a fixture, unless it holds the matching license too. Section 7057(c) puts the same fire-protection and C-57 limits on a Class B general building contractor. Moving a wall that carries the roof load, or re-piping a bathroom instead of swapping a tub, is the kind of scope that needs the matching specialty license in the mix, on either classification.

The $1,000 exemption does not reach a Concord remodel

Section 7048 exempts a job from the licensing chapter only if the combined price for labor, materials, and everything else is under $1,000, the work is "casual, minor, or inconsequential," and the work "does not require a building permit." Concord's Information Bulletin IB-022 requires a building permit for a kitchen or bathroom remodel, including a straight replacement, so that exemption does not cover the job regardless of price. The same section blocks splitting one project into smaller contracts to get under the $1,000 line, and it does not protect anyone who advertises as a contractor or hires help to do the work.

Checking the classification before you sign

Section 7059 lets the CSLB adopt rules to classify contractors and to limit each one to the classification it is qualified for, and it lets a specialty contractor take on a second trade's work only when that work is "incidental and supplemental" to its own licensed trade. Ask which classification, B or B-2, is on the contractor's license, and what scope that license was examined for, then check the number on the Contractors State License Board license lookup before you sign anything.

What this referral will not do

Concord Remodel Guide is an independent referral service, not a contractor, and we never classify or vouch for a contractor's license. We pass your request to one independent licensed general contractor who serves Concord, CA, and you check that contractor's classification yourself. To ask for a callback, use the request form.

Class B and B-2 questions

What license does a kitchen remodeling contractor need in California?

Usually a Class B general building license, which section 7057 requires when the job needs at least two unrelated building trades or crafts. A Class B-2 residential remodeling license, added by section 7057.5, can cover the same kind of job on an existing wood-frame home if the contract includes at least three unrelated trades from its list, such as drywall, flooring, painting, tiling, and minor electrical, plumbing, or mechanical fixture work.

Can a general contractor do electrical and plumbing in a kitchen remodel?

A Class B can take a kitchen remodel that includes electrical and plumbing work as part of the two or more trades its own license requires. Section 7057.5 lets a B-2 install, repair, or replace an electrical or plumbing fixture, but bars a B-2 from installing, replacing, substantially altering, or extending the electrical or plumbing system itself without the matching specialty license.

What is a B-2 contractor license in California?

The B-2 Residential Remodeling Contractor classification, added by Business and Professions Code section 7057.5 effective January 1, 2021. It covers a project on an existing residential wood-frame structure that needs at least three unrelated building trades or crafts in one contract, from a list that includes drywall, finish carpentry, flooring, insulation, painting, plastering, roof repair, siding, tiling, and minor electrical, plumbing, or mechanical fixture work.

Does the $1,000 minor work exemption let someone remodel without a license?

No. Section 7048 only exempts work under $1,000 that is casual, minor, or inconsequential and does not require a building permit. Concord requires a building permit for a kitchen or bathroom remodel, including a straight replacement, so the exemption does not apply regardless of the price.

How do I check what trades a contractor is actually licensed for?

Use the Contractors State License Board license lookup and read the classification shown on the license, such as B or B-2, against the scope of your project. This page does not check any specific contractor for you.

Ask a licensed general contractor to follow up

Call or send a request with your address and whether this is a kitchen, a bathroom, or both. We pass your request to one independent licensed general contractor who serves Concord, CA, if one is available.